HAAS

 

thumb-1

VF1

Control Options: Rigid Tapping Synchronized tapping eliminates the need for expensive, floating tapholders, and prevents lead-thread distortion and start-thread pullout.

20-Station Automatic Tool Changer

Through-Spindle Coolant Ready machines are pre-configured to accept an optional Haas Through-Spindle Coolant system. The TSC drawbar and wiring is preinstalled at the factory, making field installation of TSC faster, easier, and less invasive.

Spindle: 8100-rpm Spindle, 40 taper, 30 hp (22.4kW) vector drive, inline direct-drive

55-Gallon (208 liter) Coolant Tank with 3/4 hp (0.6 kW) pump; 5.25 gpm @ 30 psi (19.9 L/min @ 2 bar)

Tell me more about VF1

thumb-1

VF3

Synchronized tapping eliminates the need for expensive, floating tapholders, and prevents lead-thread distortion and start-thread pullout.

Machines with the lifting provision have built-in attachment points for lifting the machine.

20-Station Automatic Tool Changer.

Spindle: 8100-rpm Spindle, 40 taper, 30 hp (22.4kW) vector drive, inline direct-drive.

55-Gallon (208 liter) Coolant Tank with 3/4 hp (0.6 kW) pump; 5.25 gpm @ 30 psi (19.9 L/min @ 2 bar)

Tell me more about VF3

thumb-1

Technical knowledge, Sensibly Applied

Visit us onYouTube Visit us on Facebook
Visit us on LinkedIn Visit us on Pinterest Visit us on Google Plus